PCM

The higher use of conventional fossil fuel is
responsible for immense harm to surroundings, due to emanation of detrimental
gases and impurities in air that leads to recent global warming. These serious
challenges encouraged engineers and scientists across the world to develop technology
in order to make use of renewable sources so as to prevent from environmental
hazards, high cost for energy production and avoid establishing new costly
power plants.

 

The Thermal Energy Storage system is evolved so that
the solar thermal energy can be stored during peak hours of sunlight and it can
be utilized during off- peak hours or during dark hours, Thermal energy storage
is ineluctable for efficient use of renewable energy sources due to their
fragmentary nature, exclusively solar energy, which is the most eventual energy
source. Thermal energy storage offers a vital role in order to bond the gap
between energy supply and its demand, which in turn, improves the performance
and effectiveness of the energy systems.
TES
can be categorized into sensible heat storage, latent heat storage and
thermo-chemical categories of heat storage systems. SHS is the most common method
for storing thermal energy, e.g. water is generally used to store heat in solar
heating systems and in air based heating systems, respectively. However, LHS
system is considered the most preferred technique for storing thermal energy
due to their wide range of availability of materials with higher thermal storage
density and almost isothermal operation. Therefore, an effective power
consumption management can be achieved by using LHS system to store the thermal
heat or coolness in off-peak loads hours and use it during peak loads hours.

We Will Write a Custom Essay Specifically
For You For Only $13.90/page!


order now

In Latent heat storage system energy is engrossed or
released in order to change the phase of external fluid with the presence of
Phase Change Material (PCM). The phase change can be carried out for
solid-solid, solid-liquid, solid-gas or liquid-gas. The transformation of
solid-solid has small latent heat when compared with solid-liquid transitions,
while solid-gas and liquid gas have high latent heat. PCMs exhibit certain
desirable thermal, kinetic, physical, chemical and economical properties.

 

Why we use Paraffin Wax as a PCM?

Paraffin wax is a white or colorless soft solid
material derived from petroleum, coal and other fuels having waxy consistency.
They have high molecular mass with long inline chains of hydrocarbons C31H64.
There is a homogenous mixture of hydrocarbon molecules with various carbon
numbers having lower melting points and poorer latent heat than pure paraffin.
Paraffin wax can be easily collaborated with LHS system due to its favorable
properties like noncorrosive in nature, safe to use, high effectiveness.

.

 

 

 

 

 

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *